12ft Newbold Slasher. In good working order. Needs a couple of new blades. Sold as is where is.

Full Gear box rebuild 2 years ago. Been Shedded all its life. Used 2 years ago well looked after machine. Always serviced. Sold as is where is

New Holland 2009 BB960A 4X3 Crop cutter square baler. 56000 Bales. Sold as is where is

New Holland 2009 BB960A 4X3 Crop cutter square baler. 56000 Bales. Sold as is where is

16FT Cut Mower Conditioner. Always Shedded. Steel on steel conditioning rollers. 2pt Centre Pivot linkage hitch. Only done 500HA of Irrigation area total. For Sale due to farm being Sold. Well looked after machine. This item is able to be refinanced with AGCO (Subject to approved Financed by AGCO). Sold as is where is

2020 Massey Ferguson 2270-XDT (Extra Density Tandem axle) – 4,695 Bales Only, ISO Controlled Extras include: Gazeeka Moisture Metre (Value $9k) Palmer AG Applicator (200L with 20L Hand wash tank) and Infrared hay detection system. (Value $8,500k). For Sale due to farm being sold.This item is able to be refinanced with AGCO (Subject to approved Financed by AGCO). Sold as is where is

Agware 24ft windrower. Hydraulic driven, has had a new belt sections put in. Comes with spray section. Good working order. For sale due to property being sold. Sold as is where is

Case 8312 Mower Center Pull 12ft cut. No Condition rollers suitable as a mower or pasture topper. Sold as is where is

Case 8312 Mower Center Pull 12ft cut. No Condition rollers suitable as a mower or pasture topper. Sold as is where is

Small Square Baler was used last year and in going order. Sold as is where is

Claas Rollant 44 Round Baler. Good working order. Used last season. For sale due to property being sold. Sold as is where is

Elsworth Engineering Round/Square Bale Feeder Excellent Condition

Almost Brand New Fendt Former 8055 Pro only done 80HA always shedded. 3PL Pull. Very well looked after machine. The Fendt Former two-rotor hay rake with central swath shot is available to meet any challenge. Professional unit Former 8055 Pro cannot be beaten when it comes to durability and quality of work. The Fendt Former hay rake implement driveline has a maintenance-free free wheel and a slip clutch for each rotor. The benefits are immediately obvious: When the PTO is disengaged, the rotors dont come to a juddering halt, but gently come to a standstill. The rotor arms can also be made ready for transport straight after disengaging the PTO to reliably protect the drive train. And that’s not all – the straight drive train ensures a long service life. WORKING WIDTH; 7.2 - 8.0M TINE ARMS PER ROTOR; 12/12. For Sale due to farm being Sold. Sold as is where is

Almost Brand New Fendt Former 8055 Pro only done 80HA always shedded. 3PL Pull. Very well looked after machine. The Fendt Former two-rotor hay rake with central swath shot is available to meet any challenge. Professional unit Former 8055 Pro cannot be beaten when it comes to durability and quality of work. The Fendt Former hay rake implement driveline has a maintenance-free free wheel and a slip clutch for each rotor. The benefits are immediately obvious: When the PTO is disengaged, the rotors dont come to a juddering halt, but gently come to a standstill. The rotor arms can also be made ready for transport straight after disengaging the PTO to reliably protect the drive train. And that’s not all – the straight drive train ensures a long service life. WORKING WIDTH; 7.2 - 8.0M TINE ARMS PER ROTOR; 12/12. For Sale due to farm being Sold. Sold as is where is

Hammermill/Rollermill all in one, new shaft, bearings and sprockets in gearbox. New dog clutch in 2021 as well as new chains and bearings. Hammer in good condition. 2 sets of screens, new auger flighting at roller mill and bearings. Sold as is where is

Hammermill/Rollermill all in one, new shaft, bearings and sprockets in gearbox. New dog clutch in 2021 as well as new chains and bearings. Hammer in good condition. 2 sets of screens, new auger flighting at roller mill and bearings. Sold as is where is

Hydraulic Grab for FEL, Euro Hitch. Sold as is where is

Kuhn 2015 FC4000 Mower Conditioner Black Diamond Roller. Sold as is where is

Kuhn 2015 FC4000 Mower Conditioner Black Diamond Roller. Sold as is where is

30ft Macdon 3000 Windrower. Belt and reel in good order. Needs welding done on the back caster. Wobble box reinforced. Did 150 acres in 2020. Sold as is where is

30ft Macdon 3000 Windrower. Belt and reel in good order. Needs welding done on the back caster. Wobble box reinforced. Did 150 acres in 2020. Sold as is where is

Massey Ferguson 2170 8x4x3 Square Baler, done 54000 bales, Fully serviced by WBS Karoonda Paddock Ready. Sold as is where is

Massey Ferguson 2170 8x4x3 Square Baler, done 54000 bales, Fully serviced by WBS Karoonda Paddock Ready. Sold as is where is

2018 Massey Ferguson TRC Tedder. Transport Chassis, 7.7 working width. Number of Rotors 6. Tine arms per Rotor 6. Always shedded and well looked after. For Sale due to farm being Sold. Sold as is where is

2018 Massey Ferguson TRC Tedder. Transport Chassis, 7.7 working width. Number of Rotors 6. Tine arms per Rotor 6. Always shedded and well looked after. For Sale due to farm being Sold. Sold as is where is

Has had reconditioned gearbox, spare belt. Good tidy machine, Comes with 4 screens. Sold as is where is

Has had reconditioned gearbox, spare belt. Good tidy machine, Comes with 4 screens. Sold as is where is

New Holland 353 Hammer Mill mixer Anniversary model in very neat and tidy order with 3 screens, and a hay roll. Always shedded. Sold as is where is.

BR740A Approx. 20000 Bales. Net wrap or string wrap, Good Condition used in 2020, Farm Sold. Sold as is where is

Wrap 4x4 Rounds, 3x3 and 4x3 Squares. Needs new hydraulic hoses replacing. Sold as is where is

Few Wheels need Tynes, Has Spare Tynes. Shows age but in good working order. Sold as is where is.

18 Wheel rake. Hydraulic lift and fold. All in working order. Sold as is where is

3PL, 8ft or 2.4 Metre Cut. Hasn't been used for 3 years. All still in working order. Sold as is where is